| Reference Designs and Kits | Accessories and Permanent Magnets |
| |
| Reference Designs and Kits |
360ASM Angle Sensing Module Evaluation Kit - AN_360ASMKIT
Quickly evaluate the Ametes 360ASM-01
Angle Sensor Module for non-contact, 360°, angle sensing applications. The 360ASM-01 combines the Sentron 2SA-10G Two-Axis Linear Hall sensor with the GMW360A Sin/Cos to Analog Interpolator to accurately measure the angle of the magnetic field generated by a small permanent magnet. An analog 2.5V±2.0V signal is available corresponding to 0 ±180° rotation angle. Mechanical adjustment for zero angle is eliminated by having the electrical zero settable to any angle. The Kit includes a small PCB (28x13mm, 1.1x0.5inch) with a connector for the 360ASM-01, 360ASM-01 Module, and a Rotary Holder with Permanent Magnet.
AN_360ASMKIT
Data Sheet, 221kB |
| Back
to Top |
| Accessories and Permanent Magnets |
Permanent Magnet for Angle Sensing - 55B0082
A 6.35mm dia. x 3.81mm SmCo permanent magnet that is polarized
across its' diameter rather than axially. Compatible with
the 2SA-10 and may be mounted into the M250-1.0 Magnet
Holder (shaft).
55B0082 Outline Drawing - pdf, 19kB
|
Permanent Magnet for Angle Sensing - 55C0126
A 6.35mm square x 2.55mm thick SmCo permanent magnet that is polarized
across its' width rather than depth. Compatible with
the 2SA-10.
55C0126 Outline Drawing - pdf, 18kB
|
Magnet Holder and Magnet for Angle Sensing - M250-1.0
The M250-1.0 is an aluminium holder with a 6.35mm diameter
shaft that is 25.4mm long. It comes with a 55B0082 permanent
magnet epoxied into one end of the shaft.
M250-1.0 Outline Drawing with magnet - pdf, 79kB
M250-1.0 Outline Drawing without magnet - pdf, 44kB
|
Magnet Holder and Magnet for Angle Sensing - M250SQ-1.0
The M250SQ-1.0 is an aluminium holder with a 6.35mm diameter
shaft that is 25.4mm long. It comes with a 55C0126 permanent
magnet epoxied into one end of the shaft.
M250SQ-1.0 Outline Drawing with magnet - pdf, 42kB
M250SQ-1.0 Outline Drawing without magnet - pdf, 41kB
Last updated on
15 August, 2011 |
| Back
to Top |
