| Isolated Electric Current Sensors (I) |
| |
Specifications |
|
Application |
Product |
Range |
Resolution |
Bandwidth |
| Sentron CSA-1VG Hall-Effect High Sensitivity Sensor IC, single-axis, analog, small size and low power. CMOS, SOIC-8 package. Magnetic non-contact current measurement. Fringe field measurement. Low field sensing. |
CSA-1VG
1-axis |
±8mT
For current approx
± 0.25A to
± 600A |
±
8µT
For current approx 0.1% of full-scale
|
DC
- 100kHz |
| Ametes Low Current Sensor Module. Uses CSA-1V. Analog output signal. Three standard ranges Configurable for unipolar or bipolar current. High voltage isolation >4kV. |
CS Series |
±0.25A
±2.5A
±10A |
±0.1mA
±1mA
±4mA |
DC to 100Hz
DC to 1kHz
DC to 4kHz |
| Ametes Three Channel Current Monitor. Uses three CSA-1VG Hall Effect magnetic sensor IC to monitor DC or AC currents in three adjacentprimary conductors. Optional "current present" outputs for primary currents greater than 1A. |
CM-Series |
±25A
±50A |
±25mA
±50mA |
DC to 75kHz
DC to 50kHz |
| Asahi Current Sensor. Current sensor using highly sensitive magnetic sensor. Hall effect IC with a hall sensor and amplifier integrated into one package |
CQ Series |
±25A
±55A |
±100mA
±200mA |
DC to 100Hz
DC to 100Hz |
| Ametes Bus Bar Module Current Sensor Isolated current measurement. Uses two CSA-1V mounting one on each side of Current Bus Bar. High Level ± 4V linear signal output. |
BBM-01 |
±8mT
For current approx
± 150A to
± 600A |
±
8µT
For current approx 0.1% of full-scale |
DC - AC
Depends on BBM geometry |
Last updated on
22 February, 2010 |
