Senis Magnetic Field Transducers, Three-Axis, F3A

A SENIS Hall magnetic field transducer consists of two modules:

  • Module H, consisting of the Hall probe and the CaH cable
  • Module E, containing the analog electronics for signal conditioning

To build up a complete measurement system, the module E needs to be connected to an adequate power supply and to a voltmeter (or A/D converter) for each measured component of a magnetic field.

F3B Transducers have fixed cable from Probe (H module) to Electronics (E module). F3A Transducers were phased out in March 2023 for fixed cables, and are only for detachable probe cables going forward.

Key Features:

  • Fully integrated CMOS 3-axis (Bx, By, Bz) Hall Probe
  • Very high spatial resolution (By: 0.03 x 0.005 x 0.03mm3; Bx and Bz: 0.15 x 0.01 x 0.15 mm3)
  • High angular accuracy (orthogonality error less than 0.1°)
  • Virtually no planar Hall Effect
  • High frequency bandwidth (from DC up to 25kHz)
  • High disturbance immunity
  • Negligible inductive loops on the Probe
  • Integrated temperature sensor on the probe for temperature compensation
  • Range: ±20mT … ±20T

Accessories

S12-5 - Power Supply

Switch Mode power supply for Senis Hall Effect Transducers. 100-240VAC, 0.8A, 50-60Hz input.

ZG12 - Zero Gauss Chamber

Used for zeroing the reading.
Dimenisons: 25mm Outer Diameter, 21mm Inner Diameter, 200mm Length.
Shielding Factor: 100

Mating Connectors

SV81 - Mating Connector for CO50-G, Male plug Signal Output
KV50 - Mating Connector, Male plug, Power Input

CO50-G - Signal Output Cable

Signal Output Cable, Unterminated on one end, 5.0m.

Transverse Probe Holder

11901230 Probe Holder for MPT type probes to be mounted transversely.

11906-0000-0 - Probe Holder, Transverse, non-metallic.

3DSA-05 - Three-Axis Differential-to-Single Ended Signals Adapter

Adapter for conversion of three differential voltages to corresponding single-ended voltage.

Pricing

Three-Axis Hall Probes and Transducers

Configured Transducers Normally in Stock. Refer to Senis Magnetic Measurement Product Guide for complete list.

Part No.DescriptionPriceIn Stock
F3B-03A02F-A.2T2K5M

Three Axis Hall Transducer, Probe Type ‘A’, 2m Cable, Fixed Connector, 0.2T, 2.5kHz, 1% Linearization.

Includes Power Adapter and CO20-X Output Signal Cables.

$5,940.00
F3A-03HS02C-A02T2K5J

Three-axis Hall Transducer, Probe type HS, 2m Cable, Detachable Connector, 2T, 2.5kHz, 0.1% Linearization.

Power Adapter (S12-5) and Output Signal Cables (CO50-G) are not included

$8,420.00
F3B-03A02F-A02T2K5M

Three Axis Hall Transducer, Probe Type ‘A’, 2m Cable, Fixed Connector, 2T, 2.5kHz, 1% Linearization.

Includes Power Adapter and CO20-X Output Signal Cables.

$5,940.00
MISC-SN

SN K3A-2T-4K-5m – 3-axis Hall probe, Cryogenic, Calibration at Room Temperature, 2T range, 5m cable

$18,780.00

Accessories

Part No.DescriptionPriceIn Stock
S12-5

Power Supply, ±12V, 90 – 264Vac, 1.8m Cable

$540.00
11901230

Probe Holder, aluminum, transverse

$150.00
11906-0000-0

Probe Holder, Transverse, non-metallic

$200.00
CO50-G

Signal Output Cable, Unterminated on one end, 5.0m

$290.00
ZG12

Zero Gauss Chamber

$420.00
SV81

Mating Connector for CO50-G, Signal Output

$40.00
KV50

Mating Connector, Power Input

$40.00
3DSA-05

Three-Axis Differential to Single Ended Signals Adapter

$1,270.00

Calibration – Senis Three-Axis Hall Probes and Transducers

Part No.DescriptionPriceIn Stock
MFT-1A-CALHIGH

1-Axis, Sensitivity & Linearity Calibration, High Field (9T)

$2,190.00
MFT-3A-CAL

3-Axis, Sensitivity & Linearity Calibration

$1,170.00
MFT-3A-CALHIGH

3-Axis, Sensitivity & Linearity Calibration, High Field (9T)

$3,940.00
MISC-SN-CAL

Cryogenic Calibration of K3A at up to 5T at 4K (+/-2K)

$4,220.00
Quantity Discount Schedule:
Quantity 1 – 4 5 – 9 10 – 19 20 +
Discount 0% 10% 15% Contact GMW

Terms and Conditions

Terms and Conditions:

Prices above are for deliveries to USA, Canada, and Mexico only.
For deliveries in all other countries please contact Senis.
Prices are expressed in U.S. Dollars, FCA San Carlos, California.
Prices are subject to change without notice.
OEM discounts are available.

Payment:

Visa, MasterCard, Amex, Prepayment before shipment, or Net 30 days (subject to credit acceptance).

Delivery:

Stock to 90 days, depending on quantity.