Bartington Fluxgate Sensors, 3-axis, Miniature and Low Power

Mag612 – 3-Axis, Miniature:

  • Range: ±90µT (probe with electronics)
  • Bandwidth: DC to 3kHz minimum (-3dB level)
  • Noise: 10 to ≤20pTrms/√Hz at 1Hz at 25°C (probe with electronics)
  • Dimensions: 20 x 20 x 20mm

Mag619 – 3-Axis, Low Profile:

  • Range: ±60µT or ±100µT (probe with electronics)
  • Bandwidth: DC to 3kHz minimum (-3dB level)
  • Noise: >10 to ≤50pTrms/√Hz at 1Hz at 25°C (probe with electronics)
  • Dimensions: 25 x 20 x 11mm

Mag648/Mag649 – Low Power:

  • Range: ±60 or ± 100µT
  • Bandwidth :Mag648 > 30Hz; Mag649 >1kHz
  • Noise: <10pTrms (Low Noise), <20pTrms (Standard Noise), <50pTrms (Basic Noise) per √Hz at 1Hz
  • Dimensions, 30 x 32 x 70mm

Mag639 – Wide Bandwidth:

  • Range: ±100µT
  • Bandwidth: 0 to 12kHz (at 50% full scale)
  • Noise: <20pTrms/√Hz at 1Hz
  • Dimensions: 25.4 x 218 mm

Mag690 – Lower Cost, 3-Axis:

  • Range: ±100 or ±1,000µT
  • Output: ±10V Full Scale
  • Bandwidth: DC to >1kHz
  • Noise: <25pTrms/√Hz at 1Hz
  • Dimensions: 122 x 32 x 32mm

Tech Support

Accessories

PSU-1

The PSU-1 contains configurable high and low pass filters for the analog signals from the Mag-03, Mag649 and Mag690 sensors.
This unit supplies dc power to any Mag-13, Mag-03, Mag649 or Mag690 sensor using the ac adapter provided or from the internal rechargeable battery. The ±12 volt supply is fully isolated and the battery provides up to 10 hours of continuous operation.

SCU-1

The SCU-1 is a 19" rack mount unit that provides low noise power and precision signal conditioning for any Mag-13, Mag-03, Mag649 or Mag690 sensor. The unit operates from a 110 or 220 Vac mains supply.

Magmeter-2

The Magmeter 2 is a portable, battery powered unit provides both power for magnetic field sensors and simple access to filtered versions of the sensor's XYZ outputs. It incorporates three displays showing the values of the magnetic field being measured by the connected sensor. Low-pass filtering (9kHz) is applied to all sensor outputs. A high-pass filter (0.1Hz) is also selectable via a front panel switch.

Mag-Shield

Mag-Shield, 100mm

The Mag-Shield is a triple-layer, mu-metal, magnetic shield cylinder with open ends for easy access. Available internal diameters are 100mm, 120mm and 140mm with length of 300mm. The 100mm ID is normally stocked.

Degaussing Wand

The Degaussing Wand is a mains powered, handheld instrument that is used for removing accumulated magnetic fields from other devices. Instruments that measure magnetic fields can become magnetized themselves, thus adversely affecting their performance.

Spectramag-6

The Spectramag-6 is a fast six-channel 24-bit data acquisition system with simultaneous sampling of all channels and a USB interface to the user's PC. It is designed for simultaneous collection and analysis of magnetic field, vibration and acoustic data in up to three axes. (Operates with the Mag690/Mag612/Mag619 only).

Pricing

Bartington Fluxgate Magnetomers, Low Power

For items not in stock, make sure to specify measurement range when ordering.

Part No.DescriptionPriceIn Stock
Mag648B

Magnetic Field Sensors, Basic Noise, DC to >30Hz

$1,540.00
Mag648FLB

Flying Lead Sensors, Basic Noise, DC to >30Hz

$1,470.00
Mag648SB

Sensors for Marine Applications, Basic Noise, DC to >30Hz

$2,120.00
Mag648UB

Unpackaged Sensors, Basic Noise, DC to >30Hz

$1,260.00
Mag649B

Magnetic Field Sensors, Basic Noise, DC to >1kHz

$1,540.00
Mag649FLB

Flying Lead Sensors, Basic Noise, DC to >1kHz

$1,470.00
Mag649SB

Sensors for Marine Applications, Basic Noise, DC to >1kHz

$2,120.00
Mag649UB

Unpackaged Sensors, Basic Noise, DC to >1kHz

$1,260.00

Bartington Fluxgate Magnetomers, Lower Cost

For items not in stock, make sure to specify measurement range when ordering.

Part No.DescriptionPriceIn Stock
Mag690-100

Three Axis Magnetic Field Sensor, ±100µT

$1,140.00
Mag690-1000

Three Axis Magnetic Field Sensor, ±1000µT

$1,140.00
Mag690

Magnetic Field Sensor

$1,140.00
Mag690U

Unpackaged Magnetic Field Sensor

$940.00
Mag690-FL

Three Axis Magnetic Field Sensor with Flying Leads

$1,090.00
Mag900

Low power three-Axis Magnetic Field Sensor, unpackaged, 30Hz bandwidth

$1,020.00
Mag901L

Low Noise, low power three-Axis Magnetic Field Sensor, unpackaged, 1kHz bandwidth

$1,220.00

Bartington Fluxgate Magnetomers, Miniature

For items not in stock, make sure to specify measurement range when ordering.

Part No.DescriptionPriceIn Stock
Mag612

Three Axis Sensor, (Noise ≤20pTrms/√Hz at 1Hz)

$650.00
Mag612U-500

Three Axis Sensor, Unpacked (Noise 10 to≤20pTrms/√Hz at 1Hz), +/-500uT Range

$1,580.00
Mag612U-90

Three Axis Sensor, Unpacked (Noise 10 to≤20pTrms/√Hz at 1Hz), +/-90uT Range

$1,580.00
Mag619

Low Profile, Three-axis sensor head, Noise 10-50pTrms/√Hz at 1Hz

 

$720.00
Mag619U

Low profile, Three-axis two-part unpackaged sensor, Noise 10-50pTrms/√Hz at 1Hz

$1,180.00

Bartington Fluxgate Magnetomers, Wide Bandwidth

For items not in stock, make sure to specify measurement range when ordering.

Part No.DescriptionPriceIn Stock
Mag639

Three Axis Magnetic Field Sensor

$4,490.00

Cables & Accessories

Part No.DescriptionPriceIn Stock
Mag612-5m

5 metre cable for Mag612 to Bartington Data Acquisition Units (except DecaPSU)

$290.00
MAG648-5m

5 metre cable for Mag648 / Mag649 (land use)

$360.00
Mag648U/649U 5 meter cable

5 metre cable for Mag648U / Mag649U (land use)

$360.00
Mag649S-5m

5 metre submersible cable for Mag648S / Mag649S

$1,530.00
Mag648S/649S Mating Connector

Mating connector for Mag648S / Mag649S Sensors

$320.00
Mag690U-5m

5 metre cable for Mag690U

$260.00
Mag670/690 adaptor cable

0.5 metre Mag670/690 to DecaPSU adaptor cable

$320.00
Mag649-10M

Cable, 10m, Mag649 to PSU1/Magmeter

$230.00
Mag690-5m

Cable 5m for Mag690

$260.00
Mag690-10m

Cable 10m for Mag690

$300.00
Mag900/901-5m

5 metre cable for Mag900/901 (land use).
Cables are available in lengths to 1500m – prices available on request.

$260.00

Common Accessories

Part No.DescriptionPriceIn Stock
PSU1

Power Supply Unit, compatible with Mag-03, Mag649, Mag690

$1,860.00
DecaPSU

10-channel power supply unit, usable with Mag-03, Mag-13, Mag690, Mag648, Mag649

$7,620.00
SCU1

Signal Conditioning Unit, compatible with Mag-03, Mag649, Mag690

$10,490.00
Magmeter-2

Power Supply and Display Unit, compatible with Mag-03, Mag649, Mag690

$4,860.00
Calibration and Repair
For Calibration and Service, see Magnetic Field Calibration & Service.

 

Terms and Conditions

Terms and Conditions:

Prices above are for domestic deliveries to Canada, USA and Mexico only.
For deliveries in all other countries please contact Bartington.
Prices are expressed in U.S. Dollars, FCA San Carlos, California.
Prices are subject to change without notice.
Quantity and OEM discounts are available.

Payment:

Visa, MasterCard, Amex, Prepayment before shipment, or Net 30 days (subject to credit acceptance).

Delivery:

Stock to 90 days.