Email: Telephone: USA +650-802-8292

Hall Magnetic Sensors
Magnetic Field
Electric Current
Angle & Position

Measurement Instruments
Electric Current
Magnetic Field
Magnetic Field Mapper
Magnetic Susceptibility

Fiber- Optic Links

Permanent Magnets

Electromagnets & Coils

Current Leads, HTS

Electromagnet Power Supplies

Particle Beam Diagnostics

Particle Beam Transport & Accelerators

• Special Sale Offers
• Discontinued Products



Conference Schedule
News Items
About GMW
Contact Information
Employment at GMW
Bartington Fluxgate Magnetometers, Mag-01(H) 
Bartington Mag-01H

The Mag-01H is a portable high performance instrument that provides precision measurements of the direction and intensity of magnetic fields from 0.1nT (1µG) to 2,000µT (20G) with a frequency response of DC to 10Hz. Axial and transverse probes are available together with unpackaged probes for cryogenic applications.

The Mag-01H instrument may be powered by either mains voltage or internal battery, and have a 4½ digit display and an analog output. The internal rechargeable sealed lead acid battery provides up to 16 hours continuous use and may be recharged using the mains adaptor provided.

The Mag-01H has an additional x10 sensitivity switch for a resolution of 0.1nT and an offset control for up to ±90µT in 10µT steps.

This instrument feature superb linearity, accuracy, and very low drift with time and temperature. Calibration is traceable to international standards, and a re-calibration service is available.

Mag-B, Mag-B, Mag-C, and Mag-D Axial and Transverse Probes
Mag-F and Mag-G Cryogenic Probes
Probes for the Mag-01H
The sensing axis of the Mag-B and Mag-D probes is along the axis of the cylindrical enlosure (axial) and the sensing axis of the Mag-C and Mag-E probes is along the axis of the short cylinder mounted at the end of the probe (transverse). The magnetic detection axis and center of sensitive volume are marked on each probe.

The cryogenic Mag-F and Mag-G probes are suitable for operation at temperatures down to liquid helium and have 1 meter of 4 x .02mm enameled copper wire connected to the sensing element for use in a cryostat or vacuum chamber. This length can be extended to a maximum of 5 meters if required. Cable assemblies with Customer specified vacuum feed-through connector and cable are available to special order.

  Tel: + 650-802-8292    Fax: + 650-802-8298
955 Industrial Road, San Carlos, CA 94070, USA