| |
Power
Supplies
We offer two different types of power supplies for the
3470 electromagnet; unipolar and bipolar.
 We
offer a unipolar supply manufactured by Sorensen, and
it is suitable for applications were a DC field is required.
It features a stability of 0.05% over 8 hours and they
are available with an optional IEEE-488 interface. Order
part number:
DLM60-10 Power supply, 60V, 10A, unipolar.
• •
•
 For
applications that require a bipolar power supply, we offer
the Kepco BOP series. They feature stability of 0.02%
over 8 hours, and an optional IEEE-488 interface may be
installed either by GMW, or by the user at a later date.
Order part number:
BOP
50-8M Power supply, 50V, 8A, bipolar.
BIT-4886
IEEE-488 Interface Card for BOP Power Supply, 16 bit.
|
Magnet
Current Cables
Magnet current and interlock connections can provide a
significant problem. We are pleased to offer a series
of cables designed to make the cable termination on our
magnets simple. For the 3470 Electromagnet, two cable
options are available; One for the Sorensen DLM series,
and one for the Kepco BOP series of power supplies.
16900090 - Cable, Current & interlock, DLM60-10
to 3470, 5m.
16900100 - Cable, Current & interlock, BOP
50-8M to 3470, 5m.
|
Magnet
Poles and Axial Holes
GMW Offers a range of Pole Caps for the 3470 Electromagnet
from 25mm to 150mm. Order by part numbers as listed below:
17801500 - Pole Pair, Reversible 20mm and 40mm
17802760 - Square Pole Cap Pair, 50mm.
For optical experiments or other applications where an
axial hole in one or both poles is required, GMW can provide
the poles with the hole pre-drilled to your specifications.
Order part:
3470-AH - Axial hole in one pole, diameter to be
specified.
|
Cabinets
 RC-351930
Optima 19" EIA rack cabinet. This handsome half-height
19" rack cabinet provides ample space for your power
supply, reversing switch, and other instrumentation.
It is two-tone gray, and is supplied with lift off side
panels, castors, and a door mounted on to the back. The
door includes two line powered cooling fans to help draw
hot air out of the rack. It does not include filler panels
and support angles.
Accessories:
P-0119 - Filler panel, 1U, light gray.
P-0319 - Filler panel, 2U, light gray.
P-0519 - Filler panel, 3U, light gray.
P-0719 - Filler panel, 4U, light gray.
P-0819 - Filler panel, 5U, light gray.
SA-30 - Support Angle Pair.
HW-1 - Hardware kit, screws and washers, set of
100.
|
Mounting Options
 For
applications that require a different field orientation,
or if it is simply more convenient to mount the magnet
vertically, we offer a vertical mounting bracket for the
3470 Electromagnet.
17900300 - Vertical Mounting Bracket for magnet.
|
Software and PC Interface Cards
LVPTMPS - Driver for SGA power supplies with
IEEE-488 interface.
LVKCMPS - Driver for Kepco power supplies with IEEE-488
interface.
LVMCTRL - Driver for complete closed-loop control
of magnet system, power supply, and teslameter drivers.
* Note: The above listed drivers require LabView 8.21 or newer version.
776671-09 - National Instruments LabVIEW Base System for Windows with 1 Yr Service (English).
 778032-01
- National Instruments IEEE-488 PC interface card,
PCI bus.
Last updated on:
10 March, 2008
|
|
|
|
