5452 Helmholtz Coil, 160mm

The Model 5452 Helmholtz Coil Electromagnet is a single axis coil pair arranged in Helmholtz geometry to give a relatively large volume of high uniformity magnetic field. The Hlelmholtz Coil Electromagnet has an aperture diameter of 160 mm (6.3 inch) with an operating range to 3 mTrms (30 Grms) at frequencies from dc to over 3 kHz. To prevent eddy currents during operation the coil support frame is machined from Delrin plastic. High frequency field operation is limited by the coil inductance of about 8 mH and the peak operating voltage of 250 V. The 5452 can be mounted in any orientation and the low mass of 6 kg (13 lbs) facilitates integration into experimental or test equipment. Since the Helmholtz Coil configuration is not magnetically shielded, magnetic and electrical conducting materials should be kept at least 300 mm from the Electromagnet center to avoid excess distortion of the magnetic field within the working volume.

Features

  • Mass = 6kg
  • 122 x 270 x 276mm
  • 3mT over 160mm diameter
  • 1mT/A

Applications

  • Magnetic material measurements
  • Magnetic sensor device development and testing
  • Magnetic sensor calibration
  • Electronic circuit sensitivity to magnetic fields
  • Biologic effects of magnetic fields

Accessories

Power Supplies

For applications that require a bipolar power supply, we offer the Kepco BOP series. They feature stability of 0.02% over 8 hours, and an optional IEEE-488 interface may be installed either by GMW, or by the user at a later date. The 5452 Helmholtz Coil Electromagnet requires one of the Kepco BOP 20V, 5A, supplies to enable 5Hz operation and sinuisoidal function to 5A (5mT peak).

BOP 20-5D Power supply, 20V, 5A, bipolar.

Magnet Current Cables

Power Supply direct to Magnet.
16907-0059-0 Cable, BOP20-5D to 5452, 5A, 5m.

PC Interface Cards

LVKCMPS - Driver for Kepco power supplies with IEEE-488 interface.
LVMCTRL - Driver for complete closed-loop control of magnet system, power supply, and teslameter (gaussmeter) drivers.
* Note: The above listed drivers require LabVIEW 8.21 or newer version.

776670-09 - National Instruments LabVIEW Full System for Windows with 1 Yr Service (English).
BIT-4886 - IEEE-488 Interface Card for BOP Power Supply, 16 bit.

Pricing

Part No. Description Qty Price

Model 5452 160mm

5452

Helmholtz Coil Electromagnet

$5,240.00
Description

Helmholtz Coil Electromagnet

Qty

Power Supplies

BOP20-5DL

Power Supply, true bipolar, 20V, 5A

$6,760.00
Description

Power Supply, true bipolar, 20V, 5A

Qty

Accessories

5972

19″ 3U Rack Mount Cabinet with USB Interface NI DAQ, Power Supply for Field Transducer, Electromagnet Interlock Status, connectors on rear panel for USB connector, field transducer & interlocks.

$5,900.00
Description

19″ 3U Rack Mount Cabinet with USB Interface NI DAQ, Power Supply for Field Transducer, Electromagnet Interlock Status, connectors on rear panel for USB connector, field transducer & interlocks.

Qty
16907-0059-0

Cable, BOP 20-5D to 5452, 5A, 5m

$150.00
Description

Cable, BOP 20-5D to 5452, 5A, 5m

Qty

Drivers, Software, and Computer Interface Cards

Note: LabVIEW drivers require LabVIEW for Windows.

LVKCMPS

LabVIEW Driver for BOP power supplies with IEEE-488 interface.

No Charge
Description

LabVIEW Driver for BOP power supplies with IEEE-488 interface.

Qty
LVMCTRL

LabVIEW Magnet Control software. Requires LabVIEW 2010 or later.

$1,180.00
Description

LabVIEW Magnet Control software. Requires LabVIEW 2010 or later.

Qty
BIT-4886

GPIB-IEEE interface card for Kepco BOP Power Supplies, 16 bit current set resolution, and full Power Supply control.

$1,990.00
Description

GPIB-IEEE interface card for Kepco BOP Power Supplies, 16 bit current set resolution, and full Power Supply control.

Qty

Systems & Pricing

5452 Helmholtz Coil Electromagnet Systems

Terms and Conditions

Exclusive Distributors:

India: Magnergy Technology
Web: www.magnergytech.com
Email: info@magnergytech.com

Japan: TOYO Corporation
Web: www.toyo.co.jp/English/
Email: magne@toyo.co.jp

Spain and Portugal: Helium 3
Web: www.helium3.es
Email: Carlos Montero, c.montero@helium3.es

Terms and Conditions:

Prices above are for domestic deliveries to USA, Canada, and Mexico only.
Prices to other Countries are approximately 1.1x USA List Price.
Prices are expressed in U.S. Dollars, FCA  Origin San Carlos, California 94070.
Prices are subject to change without notice.
OEM discounts are available.

Payment Terms:

Visa, MasterCard, Amex, Prepayment before shipment, or Net 30 days (subject to credit acceptance).
Orders may be submitted to sales@gmw.com

Delivery:

Stock to 120 days.