|
Specifications
- IPCT
|
|
Mechanical Specifications / Other |
| Inside
Diameter |
69mm (2.716in) |
| Dimensions |
112mm (4.410in)
W x 51mm (2.000in) D x 200mm (7.874in) H |
| Weight |
0.5kg (1.1lbs) |
| Connector |
DB9 male on front panel |
| Electrical Specifications |
|
Full scale range
|
Any value from ±1 mA to ±5000 mA (5A), factory preset |
| Overrange |
120% full scale permanently |
|
Saturation
|
> 120% full scale |
|
Damage level
|
DC: unlimited, sensor saturates at approximately 1.1 x fs |
| Voltage isolation |
5 kV current conductor to ground, user may add additional insulation |
|
Resolution
|
< 10 μA rms (1sec integration) |
| Linearity error |
< 0.1% fs |
|
Absolute accuracy
|
+- 0.5% fs |
| Calibration |
Internal 10 turn winding, <1A max |
|
Ripple
|
7 kHz and even harmonics, amplitude depends on range |
| Bandwidth |
DC up to 4 kHz, depending on range |
|
Response Time
|
For 100mA fs: 50% < 130µs, 90% <250µs. Depends on fs range. |
|
Output
|
±10 V bipolar, buffered (20 mA max.) withstands permanent short circuit |
| Power Supply |
±12V to ±15V, 100mA (see Note 1 below) |
| Temperature Zero Drift |
± 5µA/°C |
| Temperature Sensitivity Drift |
<± 100ppm/°C |
| Operating Temperature |
- 25°C to 60°C |
Storage Temperature
(to avoid damage) |
- 40°C to 100°C |
| Zero adjust |
20-turn front-panel potentiometer. Adjust after power on. |
|
Stabilization after overload
|
10 ms max |
| Magnetic field sensitivity |
50 μA/Gauss typ. |
